Saturday, 2 December 2017
FOLLOW THE STEPS BELOW
Friday, 24 November 2017
DTB FIRMWARE--HACK ANY DIGITAL DECORDER{STARTIMES,DSTV,GOTV,ZUKU}
Since we are in a Digital world Everything has easily hack able... so today am going to show you how to hack digital Decorders and watch DSTV,Zuku,GO TV,Star Times and paid channels for free with additional other international channcels including Supersport 3, Mtv Base,Fox,Sony Max,Nickelodeon,MLET movies,Discovery channels such as NAT GEO wild,NAT GEO GOLD,ANIMAUX etc READ ALSO: Top 10 Sports Betting Sites in Kenya With FREE bets
All you need is an unscrambler software..you can download it here .but unfortunately it’ free..You must Subscribe by clicking on the Red Bell on left lower corner and share these article ….
NOW.. DOWNLOAD THE DTB FIRMWARE UNSCRAMBLER HERE
NOW.. DOWNLOAD THE DTB FIRMWARE UNSCRAMBLER HERE
What you need is;
1.Unscramble Firmware
2.Digital Box with USB port/memory card slot
3.USB/memory card
READ ALSO:HOW TO WATCH FREE CHANNELS ON DSTV USING A REMOTE ONLY
*After downloading this firmware, save the files to a USB flash disk or a SD card.
*After downloading this firmware, save the files to a USB flash disk or a SD card.
*Turn on the DECORDER and insert your USB or SD card.
*Using your remote control, press menu and select SOFTWARE UPGRADE >VIA USB
*A dialog will pop requiring you to confirm. Press OK to confirm upgrade and then be patient for it to upgrade. This process takes about two minutes to complete.
You can also restore your decoder back to its factory or original settings any time you wish i.e downgrading.
*When upgrade completes, switch the box off and on again and perform an automatic scan and you will be amazed to see that all the channels that were previously marked with $, € or £ are now unscrambled and accessible for free.
READ ALSO:TOP UP AIRTEL AITRTIME USING MPESA
READ ALSO:TOP UP AIRTEL AITRTIME USING MPESA
Friday, 17 November 2017
Ever wondered how to add free dstv channels on older decoder models 1110,1131 & 1132 ? Follow the following simple steps.
Disclaimer: Doing this may harm your decoder in any way. Anything experienced after following these steps is at owner’s risk and techmedy will not be liable for any damage.
No: 1 Setting up of your decoder, make sure that your decoder software is updated to the latest version. To do this update: Press the Menu button. Select “Advanced Options” and press OK. Select “DSD UPGRADE” and press OK. The decoder should start to upgrade the software now.
No: 2 Press menu Select “Advanced Options” Select “Dish Installation” Enter the pin “9949” Select ‘if needed’ “Network Configuration” Select “Network 2 Setup” NB: Leave “Network 1 Setup (Home)” unchanged!! Set Signal Setup to “Enabled” by selecting it, and moving left or right Set Frequency to “12603” Set Symbol Rate to “26652 Set Polarization to “Vertical” Set FEC to “1/2” Select “Accept these settings”
No: 3 Select “Network 3 Setup” Set Signal Setup to “Enabled” Set Frequency to “12634” Set Symbol Rate to “16170 Set Polarization to “Vertical” Set FEC to “3/4” Select “Accept these settings”
No: 4 Select “Network 4 Setup” Set Signal Setup to “Enabled” Set Frequency to “12682” Set Symbol Rate to “27500” Set Polarization to “Vertical” Set FEC to “3/4” Select “Accept these settings”
No: 5 Select “Network 5 Setup” Set Signal Setup to “Enabled” Set Frequency to “12562” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 6 Select “Network 6 Setup” Set Signal Setup to “Enabled” Set Frequency to “12” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 7 Select “Network 7 Setup” Set Signal Setup to “Enabled” Set Frequency to “12682” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 2 Press menu Select “Advanced Options” Select “Dish Installation” Enter the pin “9949” Select ‘if needed’ “Network Configuration” Select “Network 2 Setup” NB: Leave “Network 1 Setup (Home)” unchanged!! Set Signal Setup to “Enabled” by selecting it, and moving left or right Set Frequency to “12603” Set Symbol Rate to “26652 Set Polarization to “Vertical” Set FEC to “1/2” Select “Accept these settings”
No: 3 Select “Network 3 Setup” Set Signal Setup to “Enabled” Set Frequency to “12634” Set Symbol Rate to “16170 Set Polarization to “Vertical” Set FEC to “3/4” Select “Accept these settings”
No: 4 Select “Network 4 Setup” Set Signal Setup to “Enabled” Set Frequency to “12682” Set Symbol Rate to “27500” Set Polarization to “Vertical” Set FEC to “3/4” Select “Accept these settings”
No: 5 Select “Network 5 Setup” Set Signal Setup to “Enabled” Set Frequency to “12562” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 6 Select “Network 6 Setup” Set Signal Setup to “Enabled” Set Frequency to “12” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 7 Select “Network 7 Setup” Set Signal Setup to “Enabled” Set Frequency to “12682” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 9 Exit once to go back to the “Dish Installation” menu Select “Scan All Networks” Your decoder will go into scanning mode and might take a while to scan all 9 networks. Do not interrupt the process even if it seams to take longer than you expected! Once completed, your picture will return as normal.
To access you public channels, press the “TV button” on your remote control. The “Bouquet Options” menu will appear. Select “Public PAS7/10” Pressing any of the arrow buttons on your remote, will open the screen with all the available Free to Air channels. Simply select the channel you wish to view and press ok to tune. To access the radio channels, simply select the “music note” on your remote (while still on Public PAS7/10 bouquet) and select which channel you would like to listen.
To access you public channels, press the “TV button” on your remote control. The “Bouquet Options” menu will appear. Select “Public PAS7/10” Pressing any of the arrow buttons on your remote, will open the screen with all the available Free to Air channels. Simply select the channel you wish to view and press ok to tune. To access the radio channels, simply select the “music note” on your remote (while still on Public PAS7/10 bouquet) and select which channel you would like to listen.
#Method 1:
Using Bluestacks: There are few ways to download WhatsApp on your PC easily which I am going share one by one. The first method to download WhatsApp on your PC is by downloading an emulator. Follow the step by step guide below:
Step No.1: To get started with, you need to download an Android emulator on your PC. Android emulator is simply an application or program which can help to run Android apps easily on your PC. "Bluestacks" is such an amazing Android emulator which you can download in order to run Android apps on your PC. You can download the Bluestacks here.
#Step No.2: After downloading the Bluestacks, you can see an user-interface like Android phones with settings options and app drawer. All you have to do is, just find the search section within it and type "WhatsApp". While typing you can see a dialogue saying "Search Play for WhatsApp" where you need to click, or you can simply click on the Icon, and you will redirected to Android Playstore. There you need tologin with your Google ID and password and you can see the page to download Whatsapp.
N/B:lease ,Dont forget to CLICK the red bell to get latest updates
N/B:lease ,Dont forget to CLICK the red bell to get latest updates
#Step No.3: Just hit the install option there and the WhatsApp download will get started soon. Just wait till the download is over and go to the app drawer section within Bluestacks. There you can see the WhatsApp app icon where you need to click and open it. That's it, you can now enjoy by using Whatsapp on your PC easily via Bluestacks anytime. Pretty easy right?
The best thing about using Bluestacks is that, you can not only use Whatsapp on your PC but can run most of the Android apps without any issue. So, you don't have to buy any expensive phone for running any Android app anymore.
