Ever wondered how to add free dstv channels on older decoder models 1110,1131 & 1132 ? Follow the following simple steps.
Disclaimer: Doing this may harm your decoder in any way. Anything experienced after following these steps is at owner’s risk and techmedy will not be liable for any damage.
No: 1 Setting up of your decoder, make sure that your decoder software is updated to the latest version. To do this update: Press the Menu button. Select “Advanced Options” and press OK. Select “DSD UPGRADE” and press OK. The decoder should start to upgrade the software now.
No: 2 Press menu Select “Advanced Options” Select “Dish Installation” Enter the pin “9949” Select ‘if needed’ “Network Configuration” Select “Network 2 Setup” NB: Leave “Network 1 Setup (Home)” unchanged!! Set Signal Setup to “Enabled” by selecting it, and moving left or right Set Frequency to “12603” Set Symbol Rate to “26652 Set Polarization to “Vertical” Set FEC to “1/2” Select “Accept these settings”
No: 3 Select “Network 3 Setup” Set Signal Setup to “Enabled” Set Frequency to “12634” Set Symbol Rate to “16170 Set Polarization to “Vertical” Set FEC to “3/4” Select “Accept these settings”
No: 4 Select “Network 4 Setup” Set Signal Setup to “Enabled” Set Frequency to “12682” Set Symbol Rate to “27500” Set Polarization to “Vertical” Set FEC to “3/4” Select “Accept these settings”
No: 5 Select “Network 5 Setup” Set Signal Setup to “Enabled” Set Frequency to “12562” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 6 Select “Network 6 Setup” Set Signal Setup to “Enabled” Set Frequency to “12” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 7 Select “Network 7 Setup” Set Signal Setup to “Enabled” Set Frequency to “12682” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 2 Press menu Select “Advanced Options” Select “Dish Installation” Enter the pin “9949” Select ‘if needed’ “Network Configuration” Select “Network 2 Setup” NB: Leave “Network 1 Setup (Home)” unchanged!! Set Signal Setup to “Enabled” by selecting it, and moving left or right Set Frequency to “12603” Set Symbol Rate to “26652 Set Polarization to “Vertical” Set FEC to “1/2” Select “Accept these settings”
No: 3 Select “Network 3 Setup” Set Signal Setup to “Enabled” Set Frequency to “12634” Set Symbol Rate to “16170 Set Polarization to “Vertical” Set FEC to “3/4” Select “Accept these settings”
No: 4 Select “Network 4 Setup” Set Signal Setup to “Enabled” Set Frequency to “12682” Set Symbol Rate to “27500” Set Polarization to “Vertical” Set FEC to “3/4” Select “Accept these settings”
No: 5 Select “Network 5 Setup” Set Signal Setup to “Enabled” Set Frequency to “12562” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 6 Select “Network 6 Setup” Set Signal Setup to “Enabled” Set Frequency to “12” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 7 Select “Network 7 Setup” Set Signal Setup to “Enabled” Set Frequency to “12682” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”
No: 9 Exit once to go back to the “Dish Installation” menu Select “Scan All Networks” Your decoder will go into scanning mode and might take a while to scan all 9 networks. Do not interrupt the process even if it seams to take longer than you expected! Once completed, your picture will return as normal.
To access you public channels, press the “TV button” on your remote control. The “Bouquet Options” menu will appear. Select “Public PAS7/10” Pressing any of the arrow buttons on your remote, will open the screen with all the available Free to Air channels. Simply select the channel you wish to view and press ok to tune. To access the radio channels, simply select the “music note” on your remote (while still on Public PAS7/10 bouquet) and select which channel you would like to listen.
To access you public channels, press the “TV button” on your remote control. The “Bouquet Options” menu will appear. Select “Public PAS7/10” Pressing any of the arrow buttons on your remote, will open the screen with all the available Free to Air channels. Simply select the channel you wish to view and press ok to tune. To access the radio channels, simply select the “music note” on your remote (while still on Public PAS7/10 bouquet) and select which channel you would like to listen.
0 comments: